outdoor solar light dusk to dawn with radar sensor

LED Solar Street Light with Radar Induction Motion Sensor is an all-in-one quality weather-resistant product suitable for residential and commercial application. Maintenance-free intelligent automatic light control system [Dusk to Dawn] with Radar Motion Sensor allows operating the LED lamp in various environments and accommodating different purposes including Security and Emergency Lighting. Smart energy-saving mode with 30% of brightness when there is no motion present prolongs the battery life through the night.



outdoor solar light dusk to dawn with radar sensor

Product Advantage:
1.Easy installation since it does not call for any wiring or trench.
2.The moment motion is detected, this solar outdoor fixture alters to a 100% brightness mode. On the other hand, if zero motion is detected, the solar light will revert to 30% energy-saving mode.
3.Ensure that you fully charge the polycrystalline solar panel under direct sunlight to allow the solar lights to illuminate for more than 10 hours (12 hours at max).
4.With a lightning proof feature and IP65 waterproof rating, this solar light can combat exposure to extreme heat, harsh weather, and other potentially hazardous elements.
5.Before the initial use, make sure to switch on the lamp’s switch and charge it for about six to eight hours.

all in one solar street lights

– The universal All-In-One Solar Street Light with PIR Motion Sensor Security Lamp delivers reliable long-lasting lighting and is ideal for maintaining casual, Security or emergency lighting around The house, garage, garden, porches, patios, balconies & verandas, side and backyard, aisles, driveway, stairs, entryway, path, fence etc.
– Applicable to Light up public areas including Parks, Parking lots, Roads, Streets, Playgrounds, walkways, pathways etc.
– Great as an outdoor Perimeter Security Light for residential or commercial property.
– Suitable for industrial and business premises including Parking, strata buildings, warehouses, cafes, hotels, coal mines, farms and farm fields, campuses and buildings etc.

General Maintenance Tips for Solar Lighting products:

– All-In-One Solar Street Light with PIR Motion Sensor Security Lamp is fully solar powered lighting product. Solar Panel should be installed in a well-lit area where it can receive maximum straight sunlight during daytime. Any cover that shades the Solar Panel will affect its ability to absorb sunlight and as a result, decrease a device’s performance.
– Clean the surface of the Solar Panel with a soft, slightly moistened cloth with soap and water or a dry brush only. Do not use any corrosive cleaning liquids or chemicals since this may damage the housing surface or impair future operation.
– Keep the Solar Panel free of dirt, debris and snow otherwise the battery will not charge properly or might also shorten battery life or cause a malfunction.
– It is recommended to place the product under the sun for recharging even it is not being used to prevent from a dead battery and maximize its life.
– In a case when the product is not being used for a long time, charge it for at least 10 hours by the sun before use.
– Please, keep the product away from the fire to prevent explosion hazard

solar street light application
solar street light application

OFF: ON/OFF Switch
2H: Turn to induction mode after full light 2H
4H: Turn to induction mode after full light 4H
6H: Turn to induction mode after full light 6H
Induction: Radar Mode
Always: Always Full Light Mode

Package Including:
Commercial street light * 1
Iron arm * 1
Remote control * 1
Instruction manual * 1
Screws & Gasket